Search results

Drawing on recent literature and empirical data, the purpose of this paper is to explore the relationships between perceived organizational support (POS), perceived overqualification (POQ) and turnover intentions (TI) in repatriates working in multinational corporations (MNCs).

Survey data were collected from 145 repatriates who had been contacted beforehand from MNCs in China. Structural equation modeling and hierarchical regression are used to examine the data.

It is shown that POQ and POS both affect repatriates TI, with POQ having the stronger effect, while POS plays a mediatory role between POQ and TI. Specifically, under the same POQ, repatriates TI will decrease as the POS increases.

The study design is cross-sectional and based on self-reporting, which makes causal explanations of the results difficult.

POQ and POS are both shown to influence TI, with POQ having the greater effect. This means managers can offset the effect of repatriates POQ on TI by providing better support and assistance, which can help MNCs reduce repatriates TI and retain employees.

This paper examines the antecedents of TI, and adds valuable new insights to the literature on repatriation through its research data, offering further evidence that managers in transnational corporations should pay more attention to organizational support policy on repatriates in order to reduce their turnover.

Based on the prediction of the consumption of medical materials, the purpose of this paper is to study the applicability of the grey model method to the field and its predicted accuracy.

The ABC classification method is used to classify medical consumables and select the analysis objects. The GM (1,1) model predicts the annual consumption of medical materials. The GM (1,1) modeling of the consumption of the selected medical materials in 2006~2017 was carried out by using the metabolite sequence and the sequence topology subsequence, respectively. The average rolling error and the average rolling accuracy are calculated to evaluate the prediction accuracy of the model.

The ABC classification results show that Class A projects, which account for only 9.79 percent of the total inventory items, occupy most of the inventory funds. Eight varieties with varying purchases and usages and complete historical data were selected for further analysis. The subsequence GM(1,1) model group constructed by two different methods predicts and scans the annual consumption of eight kinds of medical materials, and the rolling precision can reach more than 90 percent.

The metabolic GM (1,1) model is an ideal predictive model that can meet the requirements for a short-term prediction of medical material consumption (Zhang et al., 2014). The GM (1,1) model is more suitable for a short-term prediction of medical material consumption with less data modeling.

This paper aims to study acoustic emission (AE) propagation characteristics by a crack under a moving heat source, which mainly provides theoretical basis and method for the actual crack detection during welding process.

The paper studied the AE characteristics in welding using thermoelastic theory, which investigates the dynamical displacement field caused by a crack and the welding heating effect. In the calculation model, the crack initiation and extension are represented by moment tensor as the AE source, and the welding heat source is the Gauss heat flux distribution. The extended finite element method (XFEM) is implemented to calculate and solve the AE response of a thermoelastic plate with a crack during the welding heating effect. The wavelet transform is applied to the time–frequency analysis of the AE signals.

The paper provides insights about the changing rule of the acoustic radiation patterns influenced by the heating effect of the moving heat source and the AE signal characteristics in thermoelastic plate by different crack lengths and depths. It reveals that the time–frequency characteristics of the AE signals from the simulation are in good agreement with the theoretical ones. The energy ratio of the antisymmetric mode A0 to symmetric mode S0 is a valuable quantitative inductor to estimate the crack depth with a certain regularity.

This paper mainly discusses the application of XFEM to calculate and analyze thermoelastic problems, and has presented few cases based on a specified configuration. Further work will focus on the calculation and analysis under different plate configurations and conditions, which is to obtain more interesting and general conclusions for guiding practice.

The paper is a successful application of XFEM to solve the problem of AE response of a crack in the dynamic welding inhomogeneous heating effect. The paper provides an effective way to obtain the AE signal characteristics in monitoring the welding crack.

The hollow copper wires of the generator are seriously corroded in cooling water. This paper aims to explore the mechanism of copper corrosion by thermodynamic calculation and kinetic experiments and to find out the precise pH range for preventing corrosion of copper in stator internal water and dual internal water cooled generators.

Thermodynamic and kinetic studies were carried out for the purpose of preventing the corrosion of hollow conducting copper wires in the internal cooling water. Thermodynamic calculation results demonstrate hollow copper wires electrochemically corroded by oxygen rather than acids (H+) and find out a precise anti-corrosion pH range. Kinetic experiments research on the effect of the pH value and oxygen concentration on corrosion and protection methods of copper in desalted water.

Research results demonstrate that, in the internal cooling water, hollow copper wires are electrochemically corroded by oxygen, rather than acids (H+). The method of preventing copper from corrosion in the desalted water is to control the pH value of the stator cooling water and the dual water inner cooling water between 7.86-8.86 and 7.86-9.26, respectively.

The thermodynamic calculation and potentiometric-pH diagram are used to obtain the accurate pH range of the inner cooling water and inner cooling water in the inner cooling water system. The kinetic experiments provide data support for the effect of temperature, pH value and oxygen concentration.

Providing quality low-cost high-rise residential housing for poor households remains a major concern worldwide and especially in Malaysia. Despite government effort to maintain the quality of the housing through the Housing Maintenance Program and 1Malaysia Maintenance Fund Program (TP1M), the maintenance industry is still faced with serious housing quality problems in terms of facilities, one of which is the lift system. As the most expensive and important transportation system in a high-rise building, a lift system requires regular maintenance and inspection to provide safe and effective service to occupants. Unfortunately, most lift systems in Malaysia are not effectively maintained. The purpose of this paper is to examine contributing factors to the breakdown of lift systems, which greatly affect resident satisfaction in low-cost high-rise residential buildings.

Semi-structured interviews were conducted with three stakeholders involved in maintenance management to identify the common causes of lift breakdown. Subsequently, a questionnaire survey was used to investigate resident satisfaction with the system.

The results demonstrate vandalism as the most common cause for the frequent breakdown of lift system in low-cost housing. The study also reveals that there is a significant relationship between system breakdown rate and residents’ satisfaction.

The paper concludes with the recommendation that stakeholders, including both maintenance personnel and residents, should commit themselves to ensuring that the use and care of lift system are correct

The paper aims to fabricate an α-tricalcium phosphate (TCP) scaffold with an interconnected porous structure via selective laser sintering (SLS). To inhibit the phase transformation from β- to α-TCP in fabrication process of porous scaffolds, a small amount (1 weight per cent) of poly (L-lactic acid) (PLLA) is added into β-TCP powder to introduce the transient liquid phase.

The paper opted for the transient liquid phase of melting PLLA to decrease the sintering temperature in SLS. Meanwhile, the densification of β-TCP is enhanced with a combined effect of the capillary force caused by melting PLLA and the surface energy of β-TCP particles. Moreover, the PLLA will gradually decompose and completely disappear with laser irradiation.

The testing results show the addition of PLLA enables the scaffolds to achieve a higher β-TCP content of 77 ± 1.49 weight per cent compared with the scaffold sintered from β-TCP powder (60 ± 1.65 weight per cent), when the laser energy density is 0.4 J/mm2. The paper provides the mechanism of PLLA inhibition on the phase transformation from β- to α-TCP. And the optimum sintering parameters are obtained based on experimental results, which are used to prepare a TCP scaffold with an interconnected porous structure via SLS.

This paper shows that the laser energy density is an important sintering parameter that can provide the means to control the micro-porous structure of the scaffold. If the laser energy density is too low, the densification is not enough. On the other hand, if the laser energy density is too high, the microcracks are observed which are attributed to the volume expansion during the phase transformation from β- to α-TCP. Therefore, the laser energy density must be optimized.

The paper provides a feasible method for fabricating TCP artificial bone scaffold with good biological and mechanical properties.

Urban population growth has increased housing density, which has expanded the construction of low-cost low-rise residential in urban areas. Good building performance and effective low-cost low-rise residential quality lead to higher user satisfaction and improve building sustainability. This study aims to focus on the factors influencing the sustainability of low-cost low-rise residential in the West Malaysia urban area to assess resident satisfaction.

A mixed-mode approach with both qualitative and quantitative were used in this study. Semi-structured interviews were conducted with 12 stakeholders to identify the common factors influencing sustainability in low-cost low-rise residential. Subsequently, questionnaire surveys were formed and distributed among building users to determine the satisfaction level with low-cost low-rise residential building performance.

The finding demonstrates that accessibility is the key factor to achieving sustainability of low-cost low-rise residential. The finding also related to the factor that influences both stakeholders and building user satisfaction levels. This study also identifies key areas that require attention to improve user satisfaction with building sustainability and building performance of low-cost low-rise residential.

This study aims to determine stakeholder and building user satisfaction levels in relation to the sustainable building factor. A few indicators have been set up to identify the factors that most influence the sustainability and environment of low-cost low-rise residential buildings. Each subchapter has a few recommendations to improve the performance of low-cost low-rise residential. Each of the factors mentioned is related to social, economic and environmental sustainability. In addition, the study discovered a strong connection between low-cost low-rise residential performance and user satisfaction.

The purpose of this paper is to study the corrosion process by examining the deterioration of X80 steel exposed to a real petroleum sample containing condensed hydrocarbon plus oilfield-produced water, which were subjected to stimulated emulsions in flowing media at 50°C.

The impedance and polarization spectra were used to assess the aggressiveness of the petroleum sample and tried to find a washing process using condensed hydrocarbon with deionized water. Mössbauer technique was used to identify the phases in precipitated ions obtained during an oven-drying procedure of the oilfield produced water.

The emulsion, chloride, sulphur compounds, heavy metals and the use of a double hydrodynamic system were the most important factors affecting the corrosion of X80 steel. The corrosion rate of this steel increased when oilfield-produced water was stimulated by a double hydrodynamic system (4.56 mm/year). It was determined to be 7.66 mm/year and 4.01 mm/year when steel was exposed to a stimulated emulsion using the petroleum sample and condensed hydrocarbon with deionized water at 24 h, respectively, suggesting that a significant process of hydrocarbon washing could occur and a more corrosive solution was highlighted. Mössbauer results showed that the ions precipitates included the following phases at Wt.%: magnetite (20.0), greigeite (22.8), siderite (3.2), pyrite (2.9), marcasite (26.7) and mackinawite (24.4).

A stimulated hydrocarbon/water emulsions with a more homogeneous solution containing high concentrations of saline compounds and heavy metals were used to simulate the susceptibility to corrosion on the internal pipeline steels exposed to any type of immiscible liquids such as condensed hydrocarbon, or crude oil, containing water. A practical application of the presented research could provide a novel framework for understanding the internal corrosion in pipelines from the simulation of washed hydrocarbons after the stimulated emulsions that can be found in the field. Because more susceptibility to corrosion for pipeline steels would be expected at the end of the transportation of the fluid. It is possible to investigate the possible corrosion mechanisms by using a dried oilfield-produced water sample interacting with the pipeline steels.

During the early 1970s, faced with the serious demographic situation, China began to fully implement the policy of family planning in urban and rural regions. Nowadays, the problems of pension and medical care for aged parents confronted by the first generation of the one‐child family have begun to gradually appear. Meanwhile, China's population and the family planning are also faced with some problems that are difficult to solve, including unbalanced fertility rate of urban and rural population, the gender imbalance, the difficulty of the risk diversification in a one‐child family, as well as the profound contradiction between the stability of the family planning policy and the drive of administrative measures. Therefore, it is necessary to establish the integrated‐scheduled life security system of the one‐child family in urban and rural areas, in order to overcome the problems and to promote the transformation of the family planning policy. The purpose of this paper is to discuss the life security system for China's one‐child families.

The life security system for the one‐child family proposed by this paper consists of three issues: the basic security based on the level of social security, the additional security of the policy insurance and the supplementary security of the commercial insurance. The paper begins with the history of the family planning policy in the first section and then go through some relevant articles regarding complementary measures such as maternity insurance, rural endowment insurance that only focused on one aspect of issues associated with the family planning. In section three, four typical problems are listed for the purpose of following discussion of corresponding solutions which are full of deficiency in section four. In part five, the integrated planning of the life security system for Chinese one‐child family is elaborated with risk and fund management. In the last part, we conclude that the family planning policy maintains stable, whereas measures to be taken are adjusted along with changeable new problems.

The policy insurance plays an increasingly important role in dealing with the life security of older people in one‐child families. It may be better to promote the kind of insurance.

The paper comprehensively discusses the life security system for Chinese families in compliance with the family planning policy.

The capability to overcome tradeoffs among costs, quality and time has become a must in high-margin businesses too. Lean thinking may be a solution, but applications in the luxury-fashion market are still rare. In order to shed light on this apparent contradiction, the purpose of this paper is to identify the key features of the luxury-fashion market that may act as barriers for the adoption of lean principles. Next, based on the results of this preliminary analysis, the paper tries to verify, if and how, lean principles can be properly reinterpreted, so as to properly fit the requirements of this market.

Due to the operating nature of lean, an empiric approach was followed. From the evidences gathered during a lean project of a world-wide company, critical elements of the luxury-fashion market were identified and used as criteria to select, among lean tools, the most appropriate ones. Lastly, selected tools were integrated in a structured framework (for lean implementation) that was used to analyze and to improve many logistics and manufacturing processes.

Developed solutions were implemented as pilot projects, with outstanding preliminary result. Results are case specific and trying to infer general considerations may be hazardous. Nonetheless, due to the relevant dimension of the project, they can be considered more than a clue concerning the robustness of the framework and, most of all, concerning the real potentialities of lean in the luxury-fashion market.

The framework is extremely operational and, together with the proposed industrial cases, can be used as a guideline to support practitioners during the implementation of similar projects.

Lean thinking is relatively new in the luxury-fashion market, where the focus on operational costs has been traditionally considered as a marginal issue. Thus, the application of lean principles in this market is the innovative element of the paper.